Panasonic FZ-S1 Série Instructions D'utilisation page 11

®
ENERGY STAR
<Only for model with the above logo on the computer>
®
As an ENERGY STAR Partner, Panasonic Corporation has
determined that this product meets ENERGY STAR
energy efficiency. By enabling available power management
settings, Panasonic computers enter a low-power sleep mode after a
period of inactivity, saving the user energy.
<For U.S.A.>
To learn more about power management, please visit the web site:
www.energystar.gov
Outline of the International ENERGY STAR
Program
The international ENERGY STAR
international program that promotes energy saving through the use
of computers and other office equipment. The program backs the
development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which
business proprietors can participate voluntarily. The targeted
products are office equipment such as computers, displays, printers,
facsimiles, and copiers. Their standards and logos are uniform
among participating nations.
<For U.S.A.>
For information about ENERGY STAR
Web Site: www.energystar.gov
<Only for model without the above logo on the computer>
This model is not certified to the ENERGY STAR
®
guidelines for
®
Office Equipment
®
Office Equipment Program is an
®
, refer to the following web site:
®
For USA
For USA
FCC Part 15 information
This product has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This product generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this product does cause harmful interference to radio or television
reception, which can be determined by turning the product off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC caution
To assure continued FCC emission limit compliance, use only
shielded interface cables when connecting to computer or peripheral
devices.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
this equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Regulatory Information (English) 11