Nuna PIPA ISOFIX base Manuel D'instructions page 20

For use
with base
E
11
XXXXXXXX
For Installation with 3-point-belt
It will fit vehicles fitted with 3-point retractor safety-belts. Seat
positions in other cars may also be suitable to accept this
child restraint. If in doubt, consult either the child restraint
manufacturer or the retailer.
For Installation with ISOFIX System
This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved
to Regulation No. 44, 04 series of amendments for general use
in vehicles fitted with ISOFIX anchorages systems.
It will fit vehicles with positions approved as ISOFIX positions
(as detailed in the vehicle handbook), depending on the
category of the child seat and of the fixture.
The ISOFIX size class for which this device is intended is C
and D.
17
The Infant Car Seat with Base is a "Semi
Universal ISOFIX Class C and D Child Restraint"
and should be fitted using at 3 point adult
seat belt approved to ECE R16 or the ISOFIX
connections. Please refer to the Vehicle Fitting
Information at the back of this manual.