Breville BES860XL Manuel page 53

CARE AND CLEANING YOUR BREVILLE BARISTA EXPRESS (continued)
CLEANING THE STEAM WAND AND FROTHING ATTACHMENT
The steam wand and frothing attachment
should always be cleaned after frothing milk.
Remove the frothing attachment and rinse in
warm tap water.
Wipe the steam wand with a damp cloth,
and then with the steam wand directed back
into the drip tray, briefly set the steam dial
to the 'STEAM' position. This will clear any
remaining milk from inside the steam wand.
All manuals and user guides at all-guides.com
Ensure the steam dial is in the 'STAND BY'
position. Press the POWER button to off and
allow the machine to cool.
If the steam wand remains blocked, use the
pin on the cleaning tool to clear the opening.
If the steam wand continues to be blocked,
the tip of the steam wand can be removed by
using the fitting in the middle of the cleaning
tool.
Unscrew the tip with the cleaning tool.
Soak the tip in hot water before using the pin
on the cleaning tool to unblock. Replace the
tip back onto the steam wand and secure
with the cleaning tool.
53