Notes On Rechargeable Battery Usage; Troubleshooting - Reolink Argus 2 Instructions D'opération

Notes on Rechargeable Battery Usage

Reolink Argus 2 or Argus Pro is not designed for 24/7 full capacity running or around-the-clock
live streaming. It's designed to record motion events and remotely view live streaming only when
you need it. Learn useful tips on how to extend the battery life in this post:
https://support.reolink.com/hc/en-us/articles/360006991893
1. Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or
Reolink solar panel. Do not charge the battery with solar panels from any other brands.
2. Charge the battery in temperatures between 0°C and 45°C and always use the battery in
temperatures between -20°C and 60°C.
3. Make sure the battery compartment is clean and the battery contacts are aligned.
4. Keep the USB charging port dry, clean and free of any debris, and cover the USB charging
port with the rubber plug when the battery is fully charged.
5. Never charge, use or store the battery near any ignition sources, such as fire or heaters.
6. Store the battery in a cool, dry and ventilated environment.
7. Never store the battery with any hazardous or combustible objects.
8. Do keep the battery away from children.
9. Do not short-circuit the battery by connecting wires or other metal objects to the positive (+)
and negative (-) terminals. Do not transport or store the battery with necklaces, hairpins or other
metal objects.
10. Do not disassemble, cut, puncture, short-circuit the battery, or dispose of the battery in water,
fire, microwave ovens and pressure vessels.
11. Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed,
or appears abnormal in any ways. If the battery is being used or charged, remove the battery
13 English
from the device or the charger immediately, and stop using it.
12. Always follow the local waste and recycle laws when you get rid of the used battery.

Troubleshooting

Camera is not powering on
If your camera is not powering on, please apply the following solutions:
• Make sure the battery is correctly inserted into the compartment.
• Charge the battery with a DC 5V/2A power adapter. When the green light is on,
the battery is fully charged.
• If you have another spare battery, please swap the battery to have a try.
If these won't work, please contact Reolink Support
Failed to scan the QR code on the phone
If you fail to scan the QR code on your phone, please apply the following solutions:
• Remove the protective film on the lens of the camera.
• Wipe the camera lens with a dry paper/towel/tissue.
• Vary the distance between your camera and the mobile phone so that the camera can focus better.
• Try to scan the QR code under sufficient lighting.
If these won't work, please contact Reolink Support
https://support.reolink.com/.
https://support.reolink.com/.
English 14