Notes On Pir Motion Sensor - Reolink Argus 2 Instructions D'opération

Notes on PIR Motion Sensor

PIR Sensor Detection Range
The PIR detection range can be customized to meet your specific needs. You may refer to the
following table to set it up in Device Settings via Reolink App.
Value
Sensitivity
Low 0 - 50
Mid 51 - 80
High 81 - 100
NOTE: The detection range would be wider with higher sensitivity but it would lead to more false
alarms. It is recommended to set up the sensitivity level to "Low" or "Mid" when you install the
camera outdoors.
11 English
Detection Distance
(For moving and living objects)
Up to 5 meters (16ft)
Up to 8 meters (26ft)
Up to 10 meters (33ft)
Important Notes on Reducing
!
False Alarms
• Do not face the camera towards any objects with bright lights, including
sunshine, bright lamp lights, etc.
• Do not place the camera near any outlets, including the air conditioner
vents, humidifier outlets, the heat transfer vents of projectors, etc.
• Do not install the camera at places with strong wind.
• Do not face the camera towards a mirror.
• Keep the camera at least 1 meter away from any wireless devices,
including WiFi routers and phones in order to avoid wireless interference.
English 12