Battery Information - ingenuity SmartSize 2-in-1 Soothing Solution Mode D'emploi

Battery Information

The swing control module requires (4) size D/LR20 (1.5V) alkaline batteries (not included) without AC Adapter. When using
the AC adapter, only use the one supplied with this swing. Do not use extension cords. Check the AC adapter, including the plug
and cord, regularly for damage. Do not use if any damage has occurred. The vibration unit requires (3) size C/LR14 (1.5V)
alkaline batteries (not included).
CAUTION Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries
:
may leak or rupture.
• Always keep batteries away from children.
• Do not mix old and new batteries.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked "rechargeable."
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not use rechargeable alkaline batteries in a Ni-Cad or Ni-MH battery charger.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-
working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries
when any function fails to operate.
• Do not dispose of product or batteries in fire, batteries may explode or leak.
This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances
that can be damaging to the environment and health. Contact local authority for recycling & collection information.
Care and Cleaning
• Seat pad/Bolster/Headrest – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all
hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble
dry, using low heat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame – Wipe the metal frame with a soft, clean cloth and mild soap.
• Storage – When putting swing away for storage, always store in a dry location, away from any heat sources, and
out of the sun.
– 3 –