Troubleshooting - Emjoi Micro-Pedi Tornado Mode D'emploi

3. Remove the roller head by pressing the release butten.
Brush of any fl akes of skin. If necessary, clean the roller
head with a damp cloth.
4. If necessarey, clean the base unit with a damp cloth.
5. Dry the everything thoroughly before reassambling them.
6. Put the roler head back on the device: insert the roller
again and place the protective cover on the device.
7. Store the device and accessories in a dry place that is out
of the reach of children.

Troubleshooting

Problem
The device is not
working.
The device stops
during treatment.
All manuals and user guides at all-guides.com
Possible cause/solution
• Is the device fully charged?
• Is the recharging device plugged
into the device? Remove the re-
charging device.
Do not use excessive pressure. For
safety reasons, the device stops auto-
matically when too much pressure is
applied on the skin.
35