Changing Attachments; Changing Rotating Roller Attachments - Emjoi Micro-Pedi Tornado Mode D'emploi

Changing attachments

CAUTION!
❐ A damaged attachment can cause injuries to the skin and
must be replaced.
❐ Make sure that the device is switched off before you
change the roller or the cone attachment.
❐ The attachments contains fragile parts. When handling
the roller, be careful to ensure that it is not damaged.

Changing rotating roller attachments

A roller must be replaced if it displays signs of damage or
wear and tear.
All manuals and user guides at all-guides.com
1. Connect the charger to the charging
jack on the device.
2. Connect the charger to a proper-
ly installed socket with protective
earth contacts that correspond to
the technical data of the device. As
soon as the device has been connec-
ted to the power supply, the charge
control light will illuminate.
3. The device has been charged after
approximately 8 – 10 hours. The
indicator light will not turn off. It
simply indicates that the device is
connected to the mains supply.
29