Emjoi Micro-Pedi Tornado Mode D'emploi page 30

1. Make sure that the device is switched off and remove the
protective cover.
All manuals and user guides at all-guides.com
2. Hold the device so that the end cap
of the roller is pointing upwards and
press the release button. The roller
will "spring" out.
3. Remove the roller from its bracket.
4. Use your fi nger to push the new roller
out of its protective sleeve and hold
the roller on its end cap between the
fi ngers on your other hand.
5. Slide the roller into the bracket in the
device until you hear it engage in place.
6. Make sure that the roller is fi rmly
secured by lightly shaking the device
back and forth.
30