Exchanging Cone Attachments - Emjoi Micro-Pedi Tornado Mode D'emploi

Exchanging cone attachments

All manuals and user guides at all-guides.com
1. Switch off the device.
2. Hold the device so that the end cap
of the roller is pointing upwards and
press the release button. The roller
will "spring" out.
3. Remove the roller.
4. Slide the adapter into the device until
it is heard to click into place. Make
sure that you slide the adapter into the
device with the "open" side fi rst.
5. Push the cone attachment into the
adapter as far as it will go.
6. Switch on the device and remove the
calluses in the usual manner by moving
the device slowly without exerting
pressure over the area of the callus.
31