Appliance Description; Intended Use; Operation; Initial Use - Inventum HNK18 Mode D'emploi

2

appliance description

HNK18
Electric heating pad
Dimensions: 44 x 33 cm
3 settings with an illuminated switch
Turbo heating
Automatic switch-off after 90 minutes
Detachable cord
100 Watt
Material: fleece
1. Mains plug
2. Mains cable
3. Controller
4. Illuminated display for temperature settings
5. Sliding switch for ON/OFF and temperature settings
6. Plug-in coupling
3

intended use

CAUTION
This heating pad is only designed to warm up the human body.
4

operation

4.1 Safety
CAUTION
This heating pad is fitted with the INVENTUM SAFETY SYSTEM (ISS). This electronic sensor technology prevents the entire
surface of the heating pad from overheating by automatically switching off in the event of a fault. If the safety system
switches off the heating pad automatically as a result of a fault, the switch is no longer illuminated even when the heating pad
is switched on.
Please note that, after a fault has occurred, the heating pad can no longer be used for safety reasons and must be sent to the
service address indicated.

4.2 Initial use

CAUTION
Ensure that the heating pad will not bunch up or become folded during use.
• First, connect the controller to the heating pad by inserting the plug-in coupling.
• Then plug the mains plug into the socket.
4.3 Switching on
To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3. The temperature setting
is illuminated when switched on.
HNK18-instructions.indd 13
4
2
3
1
6
5
13
English •
27-8-2014 10:58:44