Appliance Description; Intended Use; Operation; Initial Use - Inventum HNK18 Mode D'emploi

2

appliance description

HNK18
Electric heating pad
Dimensions: 44 x 33 cm
3 settings with an illuminated switch
Turbo heating
Automatic switch-off after 90 minutes
Detachable cord
100 Watt
Material: fleece
1. Mains plug
2. Mains cable
3. Control
4. Illuminated display for temperature settings
5. Sliding switch for ON/OFF and temperature settings
6. Plug-in coupling
3

intended use

CAUTION
This heating pad is only designed to warm up the human body.
4

operation

4.1 Safety
CAUTION
• The heating pad is fitted with a the INVENTUM SAFETY SYSTEM (ISS). This sensor technology provides protection against
overheating across the entire surface of the heating pad with an automatic switch off in the event of a fault. If the SAFETY
SYSTEM has switched off the heating pad, the temperature settings are no longer illuminated when switched on.
• Please note that for safety reasons, the heating pad can no longer be operated after a fault has occurred and must be sent
to the specified service address.
• Do not connect the defective heat pad with another control of the same type. This would trigger a permanent switch off via
the control's safety system.

4.2 Initial use

CAUTION
Ensure that the heating pad will not bunch up or become folded during use.
• First, connect the control to the heating pad by inserting the plug-in coupling.
• Then plug the mains plug into the socket.
4.3 Switching on
To switch the heating pad on, set the sliding switch for ON/OFF and temperature settings to setting 1, 2 or 3. The temperature setting
is illuminated when switched on.
5
2
3
1
6
4
15
English •