Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
product description
1.
Operating panel
2.
Protective grille
3.
Selection key
4.
On / off key
5.
Temperature selection key
6.
Temperature display
7.
Power supply indicator
8.
Ventilation indicators - low - high
9.
Heat indicators - low - high
1
3
prior to first use
Before using the heater for the first time, proceed as follows: carefully remove the heater from its packaging and remove
all packaging material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of
children. After unpacking the appliance, check it for external damage that may have occurred during transport.
Select a suitable location for the heater. The heater is provided with anti-tilting protection, therefore always place the heater
in a straight position on a heat resistant flat surface. Make sure there is enough space around it for sufficient ventilation.
Check that the voltage corresponds with what is stated on the information plate and insert the plug in the socket.
It is possible that the heater smells "new" when used for the first time, this is entirely normal, will do no harm and the
smell will disappear automatically.
4
using the fan heater
Insert the plug in a socket. The power supply indicator
Press the on / off key to switch on the heater.
Press the selection key to select whether the heater should only vent or heat. At each press of the selection key, the position
changes and a different indicator lights up.
2
lights as long as the heater is connected to the power supply.
7
8
9
3
4
5
English
6
13
•
Publicité
Table des Matières
