Télécharger Imprimer la page

Bebeconfort Nacelle STREETY Notice D'utilisation page 41

Publicité

GB
- NEVER LEAVE YOUR CHILD UNATTENDED
- We advise you to read these instructions carefully and to familiarise
yourself with the product before use.
- Keep these instructions so that you can refer to them later.
- Approved for group à 0 (up to 10 kg or approx 10 months)
- The carrier may only be fitted on the back seat of cars which are fitted
with 2 or 3 point safety belts, whether they are the inertia reel type or
not, which comply with regulation no. R16/ECE/EEG.
- This car safety kit may only be used with the carrier for which it is
intended.
- Products have been carefully researched and manufactured for your
baby's safety and comfort.
- For your safety and your child's, always fix the carrier in the vehicle;
always strap your child in with the safety harness, however short the
journey you are making.
- Put the front seats as far forward as they will go so that the child does
not come into contact with them.
- Even minor shocks which happen as a result of a collision with another
vehicle can transform your baby into a real projectile.
- The user must always ensure that luggage or items that are likely to
cause injury to the occupant of the carrier in the event of a collision
must be securely stowed away.
- Never place heavy objects on the rear parcel shelf to avoid them being
thrown during an accident.
- Never make any modifications to the construction or materials of the
car safety kit and the belt.
- The car safety kit and the carrier must be replaced after an accident if
they have been damaged.
- After putting your child in place, ensure that the belt is suitably tight by
pulling the strap.You should also check that the belt is not twisted.
- Always check that no part of the safety kit or harness is trapped under
a seat or in the door of the vehicle.
- The child restraint must not be used without the cover and should
not be replaced with any other than the one recommended by the
34
All manuals and user guides at all-guides.com
IMPORTANT
manufacturer as the cover constitutes an integral part of the restraints
performance.
- The temperature inside a car can get very high, especially after lengthy
exposure to the sun. In these conditions it is strongly recommended to
cover the car safety kit with cloth or other material which will prevent
the harness fitting/fixings, and other metal components, becoming too
hot and burning your child.
- Use only the accessories sold or approved by the manufacturer. The
use of other accessories may be unsafe.
- The rigid elements and plastic parts of a child car seat must be fitted
and positioned in such a way that, under the conditions of normal
vehicle use, they cannot become trapped under a mobile seat or in
the door of the vehicle. This child car seat is only effective when
used in accordance with the manufacturer's instructions. Under no
circumstances should you modify this car seat in any way.
- The carrycot must be positioned at right angles to the direction of
travel (feet towards the car door).
- It is essential that the carrycot be replaced after an accident.
- CLEANING :
- After dismantling (make sure you have well noted how the various pieces
are assembled on the seat in order to assemble them back properly),
wash the upholstery with some lukewarm soapy water (never wash in a
washing machine), rinse properly and dry flat.
- Never iron.
- Only use a damp cloth to clean the car safety kit.

Publicité

loading