Renkforce RF-DAB-Retro1 Notice D'emploi page 43

All manuals and user guides at all-guides.com
d) FM operation
Manual station search
• Briefly push the button
• Every push of a button changes the reception frequency in steps of 50 kHz.
Automatic station search run
• Push the button
• If a FM station with sufficiently strong signal is found, the scan stops and the station is played
back.
Please set weaker stations by manual station selection.
Use the menu to set if the automatic station scan is to find only strong stations or all
stations. Scanning for all stations may lead to the station scan stopping after every
frequency stop in some broadcasting areas. In this case, set the search setting to
strong stations only.
Station memory
• The device can save up to 10 FM stations.
• The station memory, selection of the stored stations and deletion of stored stations works the
same as described for DAB mode.
Calling station information
• Push the INFO button (6) to display various types of information on the station on the display.
• Push the INFO button (6) once more to move to the next display.
• The contents of the displayed information depend on the station.
36
(9) or (10) to change the reception frequency step by step.
(9) or (10) buttons and keep it pushed until the station scan starts.