General Functions - Renkforce RF-DAB-Retro1 Notice D'emploi

All manuals and user guides at all-guides.com
10. Operation
a) General Functions
Switching on and selecting the operating mode
• After its first connection to the power supply, the device shows a selection menu for the
various operating modes.
• Use the buttons
switch (11).
• Push the button
the last operating mode you used.
Setting the volume
• Turn the dial switch (11) to set the volume.
Turning clockwise > Volume is increased
Turning counter-clockwise > Volume is reduced
Selection of the operating mode
• Push the MODE (2) button to display the selection menu for the different operating modes.
• Use the buttons
switch (11) as described above.
Switching off
• Push the button
In spite of the deactivated condition, the device continues to be connected to the
mains via the mains adapter.
When switched off, the display (12) shows the time.
32
(9) or (10) to select the desired operating mode and push the dial
(1) in order to switch the device on again later. Then the device starts in
(9) or (10) to select the desired operating mode and push the dial
(1) to switch the device off again.