List Of Materials; Parts Not Supplied - Elica EVV636S1 Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
5x45 mm
4x8 mm
Torx 10 adapter
Mounting template
Tools/Materials required
• Level
• Drill
• 1 ⁄ " (3.2 cm), ⁄ " (3.2 mm), and
1 1
4 8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
- Flat-blade
- Phillips
- Torx 10
Pieces
1
6
8
1
1
Parts no supplied
⁄ " (4.8 mm) drill bits
1
1 6
Supplied Part
Duct covers
8" round air transition
8x40 mm
10x60 mm
Duct cover bracket
Parts needed
• Home power supply cable
• 1 - ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories and consumable parts
KIT
Long Chimney
Extension
in Line Blower
1200 Kit
External Blower
1200 Kit
Pieces
2
1
2
4
1
# Part
KIT0146881
KIT0154387
KIT0153054
5