Installing This Product; Installation Notes - Pioneer AVIC-X1BT Manuel D'installation

Installation

Installing this product

Installation notes

• Do not install this product in places where it may become subject to high temperatures
or humidity, such as:
* Places close to a heater, vent or air conditioner.
* Places exposed to direct sunlight, such as on top of the dashboard or the rear shelf.
* Places that may be splashed by rain, for example close to the door.
• Install this product in an area strong enough to bear its weight. Choose positions where
this product can be firmly installed, and install it securely.
If the display unit or Hide-away unit are not securely installed, the current location of
the vehicle cannot be displayed correctly.
• When installing this product, make sure none of the leads are trapped between the unit
and the surrounding metalwork or fittings.
• Do not install the Hide-away unit and the Bluetooth adapter on the board covering the
spare tyre or other places which are subject to vibration.
• When the Hide-away unit and the Bluetooth adapter are installed under a front seat,
ensure that they do not obstruct the sliding action of the seat.
• When installing the Hide-away unit, choose a position that ensures there will be no con-
tact with luggage. The impact of a heavy weight or sudden shock on the Hide-away unit
will adversely affect the accurate display of the current location of the vehicle.
• Avoid installing the Hide-away unit and the Bluetooth adapter in places where they will
interfere with loading and unloading of the spare tyre, jack, tools, etc.
• When installing a Bluetooth adapter, be sure to make sufficient space on its top surface.
There is an aerial under the top surface and covering it may cause trouble to the radio
transmission and reception.
• Depending on the location of a Bluetooth adapter, some noise could be heard during a
voice call. In this situation, move the Bluetooth adapter so as to reduce noise.
• Check that a disc can be ejected with the display unit installed.
• Install the Hide-away unit horizontally on a surface within +30 degrees to –30 degrees
tolerance (within five degrees to the left or right of your vehicle's direction of travel).
Mis-installing the unit with the surface tilted more than these tolerances would increase
the potential for errors in the location display, and might otherwise cause reduced dis-
play performance.
5°
19
30°
30°