Switching Off; Temperature Regulation - Zanussi ZBF22451SA Notice D'utilisation

Mode
5
It is possible to change predefined sound of
buttons to a loudly one by pressing together
Display
A B
F E
Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the display
is off.
The alarm buzzer could operate after few
seconds.
The temperature indicators show the set default
temperature.
To reset the alarm refer to "High temperature
alarm".
To select a different set temperature refer to

"Temperature regulation".

If "dEMo" appears on the display, refer to
"Troubleshooting" chapter.

Switching off

1. Press the appliance ON/OFF button for 5
seconds.
The display switches off.
2. Disconnect the mains plug from the power
socket.
Temperature regulation
Set the temperature of the appliance by
pressing the temperature regulator.
Default set temperature:
• -18°C for the freezer .
The temperature indicators show the set
temperature.
The set temperature will be reached
within 24 hours.
After a power failure the set
temperature remains stored.
18
All manuals and user guides at all-guides.com
C
D
ON/OFF
6
Mode and temperature colder button for some
seconds. Change is reversible.
A) Timer indicator
B) QuickFreeze function
C) Temperature indicator
D) Alarm indicator
E) ChildLock function
F) DrinksChill function
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by flashing the alarm
icon and freezer temperature indicators, and
sounding of buzzer.
Press any button.
The buzzer switches off.
The freezer temperature indicator shows the
highest temperature reached for a few seconds,
then displays the set temperature again.
The alarm indicator continues to
flash until the normal conditions are
restored.
QuickFreeze function
This function stops automatically after 52 hours.
To switch on the function:
a. Press Mode until the corresponding
icon appears.
The QuickFreeze indicator is flashes.
b. Press OKbutton to confirm.
The QuickFreeze indicator is shown.
To deactivate the QuickFreeze function, repeat
the procedure until the QuickFreeze indicator
goes off.
The function switches off by
selecting a different freezer set
temperature.
Door open alarm
An acoustic alarm will sound if the door is left
open for a few minutes. The door open alarm
conditions are indicated by:
• a flashing Alarm indicator;
www.zanussi.com