Warnings & Safety Instructions; Display Functions - Dometic Go Power GP-PC Serie Mode D'emploi

4. DISPLAY FUNCTIONS

3. WARNINGS & SAFETY INSTRUCTIONS
HIGH VOLTAGE RISKS
Operation of this device may produce a high voltage which could cause severe injuries or death in case of
improper installation or operation of this device.
Do not touch any electrical conductors to avoid electrical shock.
Never work on live (energized) electrical equipment.
When working around a battery, do not allow tools to bridge the battery terminals or short circuit any part of the
battery.
Use only tools that have insulated handles.
PV modules can generate high DC voltages!
MAINS AND CHARGING CURRENT RISKS
Make sure the cables are always connected to the correct terminal. An electrical shock can be lethal.
4. DISPLAY FUNCTIONS
The controller is equipped with 3 LEDs to display the operating status.
In normal operation, the controller shows the charging status, the battery SOC status and the load output status.
CHARGE DISPLAY
Charge LED
SOC LED
Load Status
LED
Controller connected to battery, night detected
(Green LED on)
Controller connected to battery, day detected
(Green LED flashes)
No battery detected
(Green LED off)
GP-PC
gpelectric.com | [page 5]