LG TONE Free TONE-FP5 Mode D'emploi page 10

Masquer les pouces Voir aussi pour TONE Free TONE-FP5:
Table des Matières

Publicité

3 When the Fast Pair connection pop-up appears on the top area of the
mobile phone screen, tap it to connect. (It only supports Android™ 6.0
or higher, and requires configuring Bluetooth and location information
settings of the mobile device.)
4 If the pop-up does not appear, select [LG-TONE-FP5] from the
Bluetooth menu on the mobile phone and connect it (for users of iOS
or Android 5.0 or lower versions).
CAUTION: In the list of Bluetooth connected devices,
!
LG-TONE-FP5_LE is not the correct model name for connection.
Check the model name in use and connect with the model name
without "LE" .
If the earbud model name is abnormally displayed on the Android
device, change the model name in the Bluetooth menu of
Connected Device Settings.
NOTE: To connect with another device, perform the above procedure again.
Automatic Reconnection
The earbuds are connected automatically when you open the cover of
the charging case. If you close the cover of the charging case with both
earbuds mounted in the charging case, the earbuds are disconnected.
8

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tone free tone-fp5w

Table des Matières