Bosch GSB 550 RE PROFESSIONAL Instructions D'emploi page 4

2 609 140 164 - Buch Seite 1 Mittwoch, 14. Januar 2004 11:57 11
Tool Specifications
Impact Drill
Part number
Rated input power*
Output power
Idling speed
Impact rate, max.
Keyless Chuck
Speed selection
Two-step switch
Right/Left rotation
Chuck clamping range, max.
max. drilling Ø
Concrete
Steel
Wood
Weight without cable, approx. [kg]
Safety class
Please observe the order number of your machine. The trade names of the individual machines may vary.
* The values given are valid for nominal voltages [U] of 230/240 V. However, these calues can vary for lower voltages and
models made for specific countries.
Operating Controls
The numbering of the machine elements refers to
the representation of the machine on the graph-
ics page.
1 Keyless chuck (0 601 14D 6..)
2 Flat face of nut
3 "Drilling/Impact drilling" selector switch
4 Locking button for On/Off switch
5 Speed selector thumbwheel (GSB 550 RE)
6 On/Off switch
7 Rotational direction switch (GSB 550 RE)
8 Button for depth stop adjustment
9 Thumbscrew for auxiliary handle adjustment
10 Auxiliary handle
11 Depth stop
12 Key chuck
13 Chuck key
Not all the illustrated or described accessories are
included as standard delivery.
4 • 2 609 140 164 • TMS • 07.01.04
All manuals and user guides at all-guides.com
GSB 550-2
PROFESSIONAL
0 601 14D 0..
[W] 550
[W] 290
[rpm] 2 500/3 000
[bpm] 48 000
–
–
–
[mm] 13
[mm] 15
[mm] 10
[mm] 25
1.7
/ II
English - 1
GSB 550 RE GSB 550 RE
PROFESSIONAL PROFESSIONAL
0 601 14D 6.. 0 601 14D 7..
550 550
290 290
0 – 3 000 0 – 3 000
48 000 48 000
–
– –
13 13
15 15
10 10
25 25
1.7 1.7
/ II
For Your Safety
Working safely with this ma-
chine is possible only when the
operating and safety information
is read completely and the in-
structions contained therein are
strictly followed. In addition, the
general safety notes in the en-
closed booklet must be ob-
served.
Wear protective glasses and ear protection.
If you have long hair, wear a protective hairnet.
Work only with close-fitting clothes.
If the cable is damaged or cut through while
working, do not touch the cable and pull the
plug immediately. Never use the machine if the
cable is damaged.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Do not op-
erate the machine in rain or moisture.
Always direct the cable to the rear away from
the machine.
Operate the machine only with the auxiliary
handle 10 .
/ II