Multi-Cd Player - Pioneer SUPER TUNER III D DEH-P3700MP Mode D'emploi

Section
07

Multi-CD Player

Playing a CD
1
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1 Disc number indicator
Shows the disc currently playing.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
3 Track number indicator
Shows the track currently playing.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until multi-CD is selected as
the source.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 Select a disc you want to listen to with
the 16 buttons.
For discs located at 1 to 6, press the corre-
sponding button number.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers,
such as 1 for disc 7, until the disc number ap-
pears in the display.
# You can also sequentially select a disc by
pressing a/b.
24
En
4
press and hold c or d.
5
track, press c or d.
Pressing d skips to the start of the next track.
2 3
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
! When the multi-CD player performs the pre-
! If an error message such as ERROR-11 is dis-
! If there are no discs in the multi-CD player ma-
! When you select a CD TEXT disc on a CD TEXT
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
To perform fast forward or reverse,
To skip back or forward to another
Notes
paratory operations, READY is displayed.
played, refer to the multi-CD player owners
manual.
gazine, NO DISC is displayed.
compatible multi-CD player, the disc and track
titles begin to scroll to the left auto-
matically.