Fender B-DEC 30 Mode D'emploi page 20

0
B-DEC™0MIDIConfiguration
In Utility Mode you can set MIDI CONTROL (menu 9) to AMP
or MIDI. If set to AMP, data sent on MIDI channel 16 will
control the amp, and channels 1-15 will be routed to the MIDI
synthesizer. This will present a problem if a normal MIDI song
is played with music on channel 16 (which could affect the
amp settings in unexpected ways). In this case you can either
delete channel 16 or move it to a different channel. If MIDI
If the MIDI CONTROL is set to AMP the following commands can be used(on CH 16).
Preset Num
Amp Volume
MIDI Volume
Start/Stop MIDI
Play
Record
Overdub
Data Increment
Data Decrement
Amp Gain
RVB Level
FX Level
FX Param1
FX Param2
FX Param3
FX Param4
Select Song
AccessB-DEC0DrumsfromanExternalController
The B-DEC 30 MIDI synthesizer also contains a standard drum
kit accessible using MIDI channel 10 using a program change
value of 1 (which may be set on most MIDI controller devices).
All manuals and user guides at all-guides.com
B-DEC 3O
B-DEC0MIDIControls
AmpControl
Program Change
f e n d e r . c o m
CONTROL is set to MIDI, all MIDI data will be routed to the
MIDI synthesizer. MIDI on channel 16 is also passed from the
MIDI IN jack to the DSP during playback of songs or patterns
if the MIDI CONTROL is set to AMP.
ControlType
0-113,127=Tuner
CC#07
CC#11
CC#85
CC#86 Don't care (Ignored if the
amp is busy playing a
pattern or song)
CC#87 Don't care (Ignored if the
amp is busy playing a
pattern or song)
CC#88 Don't care (Ignored if the
amp is busy playing a
pattern or song)
CC#96
CC#97
CC#102
CC#108
CC#110
CC#111
CC#112
CC#113
CC#114
CC#119 0-63 (Ignored if the amp
is busy playing a pattern
Most MIDI notes on the keyboard correspond to a different
instrument within the standard drum kit (not all notes are
used). Other drum kits are available on MIDI channel 10 using
program change values 9, 17, 25, 26, 33, 41, 49, 57, or 127.
ValueRange
0-127
0-127
Don't care
Don't care
Don't care
0-127
0-127
0-127
0-127
0-127
0-127
0-127
or song)