Personal Safety - Greencut GHT260X Manuel D'utilisation

40
All information included in this manual is relevant to your own safety and that of your environment. If you have any
questions about the information included in this manual, consult a professional or contact the Authorised Service Centre.
The following information on hazards and precautions includes the most probable situations that may arise during the use
of this machine.
Check all the documentation, packaging and product labels before using it. If you encounter a situation not described in
this manual use common sense to use the machine as safely as possible and, if you see any danger, do not use the machine.
USERS
• This machine has been designed to be manipulated by users of legal age who have read and understood these
instructions. Do not allow people under age and people who do not understand these instructions to use the
machine.
• Familiarise yourself with this machine before using it. Make sure you know where all the controls are, the security
devices and how they should be used.
• If you are an inexperienced user, it is highly recommend that you practice doing simple jobs and, if possible, in
the company of an experienced person.

PERSONAL SAFETY

• Do not use this machine for any purpose not intended.
• Do not force this machine. Proper use for the type of work to be done will allow you to work better and safer.
• Be alert, watch what you are doing and use common sense when operating this machine. Never use the machine
with defective protections or without safety devices.
• Do not modify the controls of this machine.
• Do not use this machine if any of its components are damaged.
• Do not use this machine when you are tired or under the influence of drugs, alcohol, or medication.
• If the machine vibrates abnormally, stop it, remove the battery and inspect the machine for the possible cause and
repair it. If you cannot find the reason, contact the Official Technical Service.
• The machine must be placed horizontally on a stable and level surface, with no steep slope.
• Remove all keys or hand tools from the work area before starting this machine.
• Keep your feet firmly on the ground and keep your balance at all times. Sliding or unstable surfaces can cause a
loss of balance and control of the machine.
• Keep all body parts away from the blade. Do not remove the cut material or hold the material to be cut when
the blades move.
• Avoid inhalation of exhaust gases. This machine produces dangerous gases such as carbon monoxide that can
cause dizziness, fainting or death.
UNFORESEEN REACTIONS WHILE OPERATING WITH HEDGE TRIMMERS: BACKWARD MOVEMENT
• A dangerous reaction could occur if moving blades contact a solid object in a critical area. This is called regression.
As a result, the operator may lose control of the unit, which can cause severe damage. To prevent backdown, strictly
follow the following safety precautions:
-
Hold the hedge trimmer firmly with both hands and with your thumbs and fingers wrapped around the
handles of the saw and position your body and arms to allow it to withstand unexpected forces. Do not
extend your arms too far and do not cut above shoulder height.
-
Keep blades away from poles, cables and rocks to prevent kickback and blade damage.
-
Keep the blades in good condition. Sharp and clean.
-
When using hedge trimmers, never look away. If necessary, leave the throttle trigger in the idle position.
-
Do not let the hedge trimmer come near your feet or lift it above your waist.
All manuals and user guides at all-guides.com