Select Base; Handset Menu Function 5: Registration - Depaepe DECT Process Notice D'utilisation

The Handset can be set to disable the outgoing call numbers that begin with the barring number set. The
user is able to select to enable/disable this feature. Note that internal calls to intercom or conference will
still be available.
1) Press SET/OK key, then press ▲ or ▼ key to select BARRING,
2) Press SET/OK key the user will be prompted to enter the PIN code, input 4-digit code (defaulted as
0000).
3) Press SET/OK to confirm, then press ▲ or ▼ key to select ON or OFF, press SET/OK key to
confirm.
4) If select ON, the display shows NUMBER 1, press ▲ or ▼ to choose NUMBER i(i=1~4).
5) Then press SET/OK to confirm, and the display shows NUMBER i(i=1~4), use the numerical key to
input numbers(maximum 4 digits) you want to barring.
6) Press SET/OK key to confirm.
7) Repeat the above steps to set the rest of 3 groups.
DATE & TIME

The user is able to set the date and time on the handset, by selecting the following option.
1) Press SET/OK key, then press ▲ or ▼ key to select DATE&TIME 2)
and the last two digits of the year flashes.
3) Edit the year through ▲ or ▼. Then use SET/OK key to confirm and enter the month value setting.
4) Use the same method for month, date and time setting.
NOTE: 1.The date and time will be automatically set when the caller ID message is received in FSK.
2. When the unit is powered on initially, the date and time will be blinking, please to set the date and
time first according to use above methods.

SELECT BASE


The handset can be registered to more than one base (up to a maximum of 4), and you can select which
base you want the handset to operate with.
1) Press SET/OK key, then press ▲ or ▼ key to choose SELECT BASE.
2) Press SET/OK key and the LCD displays BASE 1 + .
3) Press ▲ or ▼ to select base (BASE 1~4) or AUTO.(Note: the handset will only link with base
number followed by a "+")
4) Press SET/OK to begin searching, if you hear a sound of "di-du-di", means linked successful.
NOTE: If you select "AUTO", the handset will link with the first of the registered bases that it finds.
HANDSET DEFAULT :

This function allows the user to restore the handset setting to the factory default 1)
Press SET/OK key, then press ▲ or ▼ key to select HS DEFAULT item.
2) Press SET/OK key to confirm.
3) The display shows PIN?, then key in the PIN code (default 0000).
4) Press SET/OK key to confirm. If the PIN code is validated all handset settings will be returned to the
factory default.

Handset Menu function 5: REGISTRATION

This function allows the user to register the handset to a specified base.
32
Press SET/OK key