Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The user can select to change the mode will dial.
1)
Press SET/OK key, then press ▲ or ▼ key to select DIAL MODE item.
2)
Press SET/OK key to enter, press ▲ or ▼ key to select TONE or PULSE dial mode.
3)
Press SET/OK key to confirm your selection.
NOTE: According to your telephone lines or PABX systems you may need to change the dialing mode
between Tone and Pulse.
FLASH TIME
The user can select the flash time (100ms, 300ms, 600ms and 1000ms) to meet your telephone line or
PABX requirement.
1)
Press SET/OK key, then press ▲ or ▼ key to select FLASH TIME item.
2)
Press SET/OK key to enter.
3)
Press ▲ or ▼ key to select the desired flash time among 100ms, 300ms, 600ms and 1000 ms.
4)
Press SET/OK key to confirm your selection.
MODIFY PIN
Some functions (including handset delete and base default) require a PIN code. The default PIN is 0000,
but you are able to change to your personal 4-digit PIN.
1)
Press SET/OK key to confirm, then press ▲ or ▼ key to select MODIFY PIN item.
2)
Press SET/OK key to confirm, and the display shows PIN?
3)
Entry the existing PIN code for the base and handset through numerical keys (the default PIN code
is 0000), then press SET/OK to confirm.
4)
If the old code is validated, the display shows NEW PIN, enter a new PIN code (4 digits), press SET/
OK to confirm.
5)
The display shows REPEAT, input the new PIN code again.
6)
Press SET/OK to confirm, the code will be stored and a tone sounded.
BASE DEFAULT
This function allows the user to restore the base setting to the factory default.
1)
Press SET/OK key, then press ▲ or ▼ key to select BS DEFAULT item.
2)
Press SET/OK key to confirm.
3)
The user will be prompted to enter the PIN code, the display shows PIN?, then press numerical keys
to input code (default as 0000).
4)
Press SET/OK key to confirm. If the PIN code is validated all base settings will be returned to the
factory default.
Handset Menu function 4: HS SETTINGS
The user is able to change a number of the settings for the handset to their own individual preferences. Press
SET/OK key, then press ▲ or ▼ key to select HS SETTINGS. Then you can do below:
ALARM
The user can set the alarm on the handset and adjust the alarm settings, to give an alert at a
programmed time of every day.
1)
Press SET/OK key, the first sub-menu is ALARM item.
2)
Press SET/OK key to confirm.
29
Publicité
Table des Matières
