Installation; Menu Settings - Depaepe DECT Process Notice D'utilisation

INSTALLATION

1) Plug the main power lead into the bottom of the base unit.
2) Plug the main adapter into mains socket with the switch on the socket set to off.
3) Switch on main power at the socket. 4) Fit the batteries in the handset
Note: If you do not modify the password yourself, all the passwords in this manual are default as 0000.

Menu Settings

During idle state, press the SET/OK key to enter the menu setting.
Press ▲ or ▼ key to select the above items and then press SET/OK key to enter. Press
setting state, or press
Note: The system will time out if you leave more than 30 seconds between key presses.
The menu tree as follow:
PHONE BOOK
CALL LOG
BS SETTINGS
HS SETTINGS
to back to the previous menu. Details of each item are shown in next parts.
HANDSET MENU TREE
LIST
NEW ENTRY
EDIT RECORD
DEL RECORD
DELETE ALL
MEM STATUS
MISSED
RECEIVED
DIALED
DELETE HS
DIAL MODE
FLASH TIME
MODIFY PIN
BS DEFAULT
ALARM
RING SETUP
TONE SETUP
LANGUAGE
HS NAME
TONE
PULSE
100/300/600/1000MS
default 0000
default 0000
ON (SNOOZE ON/OFF)
OFF
INT RING
EXT RING
KEY TONE
BATTERY LOW
RANGE ALARM
16 kinds
26
to quit the