Tone Setup; Handset Name; Auto Answer - Depaepe DECT Process Notice D'utilisation

3. If you select VOLUME OFF for EXT RING, there will be a ringing off icon
when there is an incoming call, the handset will not ring.(Shortcut key: press and hold
switch the handset external call ring on/off)

TONE SETUP


The user is able to change the handset tone settings.
1) Press SET/OK key, then press ▲ or ▼ key to select TONE SETUP item.
2) Press SET/OK key to enter.
3) Press ▲ or ▼ key to select the KEY TONE and BATTERY LOW, RANGE ALARM setup.
4) Press SET/OK key to confirm.
5) Press ▲ or ▼ key to select the ON or OFF to enable/disable the sounding of a beep respectively.
6) Press SET/OK key to confirm your selection.
NOTE:
 If you turn the tone on for key tone, a beep for key tone will sound when a key is pressed on the handset.
 If you turn the tone on for battery low warning, a beep will sound when the battery is low.
 If you turn the tone on for the out of range warning, a beep will sound when the handset goes out of range of
the base unit.
LANGUAGE

1) Press SET/OK key, then press ▲ or ▼ key to select LANGUAGE item.
2) Press SET/OK key to enter.
3) Press ▲ or ▼ key to select the language among FRANÇAIS (French), ITALIANO (Italian),
ESPAÑOL (Spanish), PORTUGUES (Portuguese), PYCCKNÑ (Russian), TÜRKÇE (Turkey),
EΛΛHNIKA (Greek), YKPAIHCЬKNÑ (Ukrainian), POLSKI (Polish), MAGYAR (Hungarian),
SVENSKA (Swedish), NEDERLANDS (Dutch), DANSK (Danish), NORSK (Danish) ENGLISH
(English) and DEUTSCH (German). Each language will display in its own native translation.
4) Press SET/OK key to confirm your selection.

HANDSET NAME


The operation will allow the user to change the handset name
1) Press SET/OK key, then press ▲ or ▼ key to select HS NAME
2) Press SET/OK key, and the display will show a flashing cursor on the name line.
3) Key in the handset name.
4) If you make a mistake, press R/CLR key to correct.
5) Press SET/OK key to confirm.

AUTO ANSWER


The Handset can be set to answer an incoming call automatically by simply pick it up from the charging
cradle. The user is able to select to enable/disable this auto answer feature. 1) Press SET/OK key, then
press ▲ or ▼ key to select AUTO ANSWER
3) Press ▲ or ▼ key to select ON or OFF
4) Press SET/OK key to confirm your selection. Exit from this sub-menu and return the user to the
AUTO ANSWER
BARRING

2) Press SET/OK key to enter.
31
display on LCD and
key to