Fcc Notice - LG LRKNS1400V Manuel Du Propriétaire

Installing the LG ThinQ Application
Search for the LG ThinQ application from the Google
Play Store or Apple App Store on a smart phone.
• Follow instructions to download and install the
application.
Connecting to Wi-Fi
The Wi-Fi button, when used with the LG ThinQ
application, allows the refrigerator to connect to a
home Wi-Fi network. The Wi-Fi icon shows the status
of the refrigerator's network connection. The icon
illuminates when the refrigerator is connected to the
Wi-Fi network.
Initial Appliance Registration
• Run the LG ThinQ application and follow the
instructions in the application to connect the
appliance.
Reconnecting the Appliance or Adding
Another User
• Press and hold the Wi-Fi button for 3 seconds to
temporarily turn it off. Run the LG ThinQ application
and follow the instructions in the application to
connect the appliance.
NOTE
• To disable the Wi-Fi function, press and hold the
Wi-Fi button for 3 seconds. Wi-Fi icon will be turned
off.
Wireless LAN Module Specifications
Model
Frequency Range
Output Power (Max)
LCW-008
2412 - 2462 MHz
< 30 dBm
SMART FUNCTIONS

FCC Notice

The following notice covers the transmitter module
contained in this product.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
the receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference
and
2) This device must accept any interference received,
including interference that may cause undesired
operation.
Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
35