Filling The Water Tank - DS Produkte KB-2012A-1 Mode D'emploi

For improved handling, you can attach the enclosed strap (23) to the main unit for
convenient, comfortable use of the hand-held steam cleaner:

Filling the water tank

ATTENTION!
❐ Always turn off the device before you fi ll the water tank.
❐ Do not overfi ll the tank. Do not add more than 450 ml.
❐ Never fi ll the device with cleaners or additives. They may irreparably damage the device and
as such, the safe operation of the device can no longer be assured.
We recommend that you fi ll the water tank with distilled water preferably to prevent
calcifi cation, especially if the hardness of your tap water is very high.
1. Open the water tank: Turn the water tank cap (12) counter-clockwise towards the opened
lock symbol and take it off.
All manuals and user guides at all-guides.com
– Slip the small loop around the front part of the main unit and pull
the cross belts back.
– Then pull the loop with the Velcro strip around the back part of
the main unit. Make sure it is fi rmly positioned in the process and
pull the strap tight before you close it with the Velcro strip.
– Set the shoulder strap to the desired size.
– To remove the strap, loosen the Velcro strip and pull the main unit
out of the loops.
2. Fill the tank with cold, clean water. You can use the enclosed
measuring cup (29) and funnel (30) to do so.
3. Screw the water tank cap back onto the water tank in a clockwi-
se direction towards the closed lock.
26