Storage; Troubleshooting - DS Produkte KB-2012A-1 Mode D'emploi

Storage

ATTENTION!
❐ Scalding hazard! Always let the appliance to cool off completely before you store it.
❐ Empty the water tank completely before you store the appliance.
❐ Do not subject the appliance to extreme temperatures, severe changes in temperature,
direct sunlight or moisture.
• Store the appliance in a frost-free, dry, clean, cool area that is not accessible to children or
animals.
• Prior to using the appliance again, the water tank should always be checked for residual water
and be completely emptied if necessary.

Troubleshooting

If the appliance is not working properly, please check whether you are able to rectify the prob-
lem yourself fi rst. Otherwise contact the customer service department.
Do not attempt to repair a defective appliance yourself.
Problem
The appliance is
not working. /
The power LED
isn't illuminating.
No steam is
released.
All manuals and user guides at all-guides.com
Potential cause / solution
• Is the plug properly connected with the socket?
• Is the socket defective?
Try another socket.
• Check the fuse for your mains connection.
• Have you pushed the On / Off switch (13) on the front of the main
unit?
Has the steam quantity been set high enough?
Turn the knob for the steam quantity control clockwise to increase
the amount of steam.
• The appliance is still not operational.
The appliance must heat up for a few seconds until steam can be
emitted.
• The water tank is empty.
Fill the water tank (see chapter "Filling the water tank").
• The nozzle is plugged.
Clean the nozzle.
30