Additional Safety Warnings; Application; Intended Use; Check The Package Contents - Haussmann PT110636 Guide De L'utilisateur

All manuals and user guides at all-guides.com

ADDITIONAL SAFETY WARNINGS

1. Use the power tool only for dry sanding. Penetration of water into the power tool
increases the risk of an electric shock.
2. Sparking occurs when sanding metal materials. Pay attention that no
persons are put at risk through sparking. Remove any combustible materials in
the vicinity of the work area.
3. Caution, fire hazard! Avoid overheating the object being sanded as well
as the sander.
4. Always empty the dust box before taking breaks. In unfavorable conditions,
e.g., when sparks emit from sanding metals, sanding debris in the dust box,
micro filter or paper bag (or in the filter bag or filter of the vacuum cleaner)
can self-ignite. Particularly when mixed with remainders of varnish,
polyurethane or other chemical materials and when the sanding debris is hot
after long periods of operation.
5. Always hold the palm grip firmly with one hand and provide a secure stance
while operating the sander. The sander can be better controlled with both hands.
6. Secure the workpiece. A workpiece clamped with clamping devices or in a
vice is held more secure than by hand.
7. Keep your workplace clean. Blends of materials are particularly dangerous.
Dust from light alloys can burn or explode.
8. Never use the power tool with a damaged power cord. Do not touch the damaged
power cord and pull the power cord plug from the wall as soon as the damage
is discovered.
Damaged power cord increase the risk of an electric shock.
WARNING! Dust created by power sanding, sawing, grinding, drilling, and
!
other construction activities, contains chemicals known to cause serious
diseases such as cancer.
Some examples of these chemicals are:
1) Lead from lead-based paints.
2) Crystalline silica from bricks and cement and other masonry products
3) Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, and work with approved safety
equipment, such as dust masks that are specially designed to filter out
microscopic particles.

APPLICATION

Read all safety warnings and instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.

Intended Use

The power tool is intended for dry sanding of wood, plastic, metal and filler as well
as coated surfaces.

Check the package contents

Carefully remove the power tool from its packaging and check if the following parts
are included:
-- 1/3 sheet sander
-- Sandpaper
-- Punch plate
-- Dust box
-- Dust exaction port
If any parts are missing or damaged, please contact Customer Service at
1-866-206-0888.
17