APPLICATION
Product Features
The numbering of the product features refers to the illustration of the power tool on
page 1.
1. Lock button
2. On/Off switch
3. Dust bag
4. Connector
5. Sandpaper clamp lever
6. Sanding pad
SPECIFICATIONS
Code
Model number
Voltage rating
Current rating
No-load speed
Pad size
ASSEMBLY
WARNING ! Always ensure that the tool is switched off and the plug is removed from
the power source before making any adjustments or performing maintenance procedures.
Selecting the right grade of sandpaper
Different grades of sandpaper can be purchased from your local store.
Use a coarse grit to sand down rough finishes, medium grit to smooth the work
and fine grit to finish off.
It is best to make a trial run on a scrap piece of material to determine the
optimum grades of sandpaper for a particular job. If there are still marks on your
work after sanding, try either going back to a coarser grade and sanding the
marks out before recommencing with the original choice of grit, or try using a
new piece of sandpaper to eliminate the unwanted marks before going on to a
finer grit and finishing the job.
18
All manuals and user guides at all-guides.com
PT110636
PT110636
120 V AC / 60 Hz
1.6 amp
12 000 OPM
3-5/8" x 7-1/4" (92 x 184 mm)
!