IKRA Mogatec IGBS 3.6 USB Manuel D'utilisation page 21

• Children and teenagers under 16 years of
age must never use this device!
• Never permit children or persons who are
not familiar with the operating instructions
to use this device.
• Statutory regulations can restrict the age
of the operator.
• Be aware of third persons in the work area.
• Use of the machine must be prevented is
people, especially children and house pets
are present.
• Only use the shear in daylight or sufficient-
ly bright artificial illumination.
• The clippers must be subjected to regular
maintenance and checks. Damaged blades
must be replaced as a pair. Professional
repair is required if damage occurs due
to impact.
• The machine should be inspected and
maintained regularly by a responsible re-
pair service only.
• Wear suitable working clothes, i.e. protec-
tive glasses, protective means for ears,
non-slippery shoes and working gloves.
Do not wear broad clothes which could be
caught by the moving parts.
• After you finish using the clippers and
before cleaning them, it is necessary to
ensure that the machine cannot be acci-
dentally turned on, such as by unlocking
the switch.
• Check the cutting unit regularly for dam-
age
• Never hold the clippers by the blades, you
may run the risk of injury even when the
clippers are not moving!
• Never touch moving blades in an attempt
to remove debris or if the blades are
blocked. Always switch off the device.
• Keep the machine away from children and
store it in a safe place.
• When working with the shears, always take
a stabile standing position, particularly
when you are using steps or a ladder.
• Do not use shears with a damaged or ex-
cessively worn-out cutting part
• Ensure that all protective devices and
handles are installed on the machine. Nev-
er try to put an incomplete machine in
operation.
GB | Operating Instruction
• Always use the protective part designed
• Before starting the work, make yourself fa-
• Only use the spare sparts and accessories
• Note that the user shall be responsible
• Prior to using the machine, inspect it vis-
• Never use the machine with damaged cov-
• Eye protection, long pants, and sturdy
• The machine should not be used in case
• Always switch off the machine
• Always ensure that the ventilation open-
• Always maintain your balance to stand
• Warning! Do not touch moving danger-
• A tingling feeling or numbness in the
GB-6
for the blade when transporting and stor-
ing the shears.
miliar with the surroundings and possible
dangers which you may not hear because
of the noise.
recommended by the manufacturer.
himself for accidents and hazards that re-
sult to other people or their property.
ually for damaged, missing, or incorrectly
attached protective devices or coverings.
erings or protective devices or without the
covering or protective devices.
footwear must be worn the entire time the
machine is used.
of poor weather conditions, especially in
case of lightning.
- if the machine is left unattended.
- before inspecting or working on the
machine
- after contact with foreign objects
- if the machine begins to vibrate strange-
ly
ings are kept free of foreign objects.
securely on slopes. Walk, don't run.
ous parts before the machine has been
switched off and the moving dangerous
parts have come to a complete standstill.
hands is sign of excessive vibration. Limit
the operating time, take sufficiently long
work breaks, distribute the work between
several people or wear anti-vibration
gloves when using the tool for extended
periods.