Xoro HTL2722W Manuel D'emploi page 90

INSTALLATION / INITIAL SETUP
Function
Using the FUNCTION menu
1. Press MENU and then use V+ or V- to
select the FUNCTION.
2. Press Enter to access the submenu.
3. Use the P+ or P- to choose the As-
pect, Blue screen, KeyLock, Country
items.
4. Make the selections and settings as
described in the following Chapter.
5. You can exit the menu by pressing
the EXIT button.
Basic Operation
1) Aspect
Press P+ or P- to access the Aspect item.
Press V+ or V- to choose aspect setting of
image as Original, 16:9, 16:9 Zoom, 16:9
SUB, 14:9.
When in PC source, the selection of control is
4:3 and 16:9.
When in SCART and HDTV source, the selec-
tion of control is Original, 4:3 and 16:9.
2) Blue Screen
Press P+ or P- to access the Blue Screen
item
Press V+ or V- to set the Blue Screen to on or
off when there is No signal input.
3) KeyLock
Press P+ or P- to access the KeyLock item.
Press V+ or V- to set the KeyLock to on or off
to enable or disable the keypad.
4) Country
Press P+ or P- to access the Country item.
Press V+ or V- to adjusts the country setting
for ATS function.
All manuals and user guides at all-guides.com
Scan mode
Aspect original
Blue screen on
Key Lock off
Geogame 0
Country Austria
Aspect 16:9
Blue screen On
Key Lock off
Country Austria
35