Xoro HTL2722W Manuel D'emploi page 79

CONNECTIONS
Connect a PC to the TV set
How to connect:
Connect a VGA cable between the VGA interface on the PC and the
VGA interface on the unit.
Connect an Audio cable between the AUDIO output on the PC and
AUDIO input socket on the unit.
How to select VGA-Source
1 Turn on your UNIT , press TV/AV button on the remote control.
2 Push P+/P- to select VGA and press V+/ENTER to confirm.
3 Turn on your PC and check for PC system requirements.
Set up Your PC Software (Windows only)
1. Click on "Settings" on the Windows start menu.
2. While "Settings" is highlighted, move the cursor so that "Control Panel" is high-
lighted.
3. When the control panel screen appears, click on "Display" and a display dialog-
box will appear.
4. Navigate to the "settings" tab on the display dialog box.
5. The two key variables that apply the TV-PC interface are "resolution" and
"colors" .
The following resolutions are supported:
•
640 x 480
•
800 x 600
•
1024 x 768
•
1280 x 1024
All manuals and user guides at all-guides.com
TV
AV
SCART1AV
SCART2AV
S-VIDEO
YPb Pr
VGA
HDMI
MMD
24