Working With Other Devices; General Safety Instructions; Other Specifications; Implicit Permission - Schiller FRED easyport TRAINER Notice D'utilisation

• Before starting the device, check that there is no damage to its housings.
•
The device may only be exposed to wide temperature variations for a very short time. Very
high temperature variations may lead to the formation of condensation water on the device.
However, if condensation water does form, dry the device and all its connections.
• Install the device so that it cannot fall on the user or the floor.
•
The device must not be connected nor used on a patient.

2.5 Working with other devices

•
Use only the accessories supplied and recommended by SCHILLER. The use of accessories
manufactured by third parties may lead to injuries, provide inaccurate information and/or lead to
device damage.
•
Very high leakage currents (total leakage currents) can be a hazard for the user.
•
The working of the device may be influenced by the presence of magnetic or electrical fields
from X-ray machines, tomography machines, radio transmitters and mobile telephones, among
other devices. Avoid the use of such devices and keep a sufficient distance from them.

2.6 General safety instructions

•
Risk of injury for the user if the device is used with faulty housings or cables! That is why the
following instruction must be followed strictly:
Immediately replace any faulty device, cable or connector.

2.7 Other specifications

Implicit permission

2.7.1
•
The possession or acquisition of this device does not amount to express or implicit permission
to use this device with parts which, alone or in combination with this device, may be covered by
one or more patents.
FRED easyport TRAINER
Page 22
User guide