Detaching And Attaching The Oven Door - Bosch HBN211.0GC Notice D'utilisation

:
Incorrect assembly!
Never move the frame before the two hooks are fully
anchored in the upper holes. The enamel could be damaged
and may break (figure C).
the two hooks must be inserted fully into the upper holes.
2.
Now move the frame slowly and carefully downwards and
insert in the lower holes (figure D).
Insert both frames into the side walls of the oven (figure E).
3.
If the rails are fitted correctly, the distance between the two
upper shelf positions is greater.

Detaching and attaching the oven door

For cleaning purposes and to remove the door panels, you can
detach the oven door.
The oven door hinges each have a locking lever. When the
locking levers are closed (figure A), the oven door is secured in
place. It cannot be detached. When the locking levers are open
in order to detach the oven door (figure B), the hinges are
locked. They cannot snap shut.
:
Risk of injury!
Whenever the hinges are not locked, they snap shut with great
force. Ensure that the locking levers are always fully closed or,
when detaching the oven door, fully open.
All manuals and user guides at all-guides.com
Detaching the door
1.
2.
3.
Attaching the door
Reattach the oven door in the reverse sequence to removal.
1.
2.
3.
:
Risk of injury. If the oven door falls out accidentally or a hinge
snaps shut, do not reach into the hinge. Call the after­sales
service.
Open the oven door fully.
Fold up the two locking levers on the left and right (figure A).
Close the oven door as far as the limit stop. With both hands,
grip the door on the left and right-hand sides. Close the door
a little further and pull it out (figure B).
When attaching the oven door, ensure that both hinges are
inserted straight into the opening (figure A).
The notch on the hinge must engage on both sides (figure B).
Fold back both locking levers (figure C). Close the oven
door.
Risk of injury!
9