JVC KD-DV6101 Manuel D'instructions page 58

Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• Sound cannot be heard
from the speakers.
• The receiver does not
work at all.
• Remote controller does not
work.
• SSM automatic presetting
does not work.
• Static noise while listening
to the radio.
• Disc cannot be played
back.
• CD-R/CD-RW or
DVD-R/ DVD-RW cannot
be played back.
• Tracks on the CD-R/
CD-RW or DVD-R/
DVD-RW cannot be
skipped.
• Disc cannot be recognized. The DVD/CD player may
• "NO DISC" appears on the
display.
58
Causes
The volume level is set to
the minimum level.
Connections are incorrect.
The built-in microcomputer
may have functioned
incorrectly due to noise, etc.
Dual Zone is activated
(see page 35).
Signals are too weak.
The aerial is not connected
firmly.
Disc is inserted upside
down.
CD-R/CD-RW or DVD-R/
DVD-RW is not finalized.
have functioned incorrectly.
Disc is inserted incorrectly.
Remedies
Adjust it to the optimum
level.
Check the cords and
connections.
Reset the receiver
(see page 2).
While Dual Zone is
activated, remote controller
only functions for operating
the DVD/CD player.
Store stations manually.
Connect the aerial firmly.
Insert the disc correctly.
• Insert a finalized CD-R/
CD-RW or DVD-R/
DVD-RW.
• Finalize the CD-R/CD-RW
or DVD-R/DVD-RW with
the component which you
used for recording.
Eject the disc forcibly
(see page 2).
Insert the disc correctly.