Operating The Revolving Console; Initial Operation - HASE Merida Mode D'emploi

5.

Operating the Revolving Console

The Merida features a revolving console as a standard
feature. To turn the Merida to the desired position, pull the
lever (A) to disengage the locking mechanism. The marking
(B) indicates the middle position for the installation.
The Merida has a maximum rotational angle of 180 degrees;
you can adjust the rotational angle in 15-degree increments.
A
B
fi g. 3
WARNING!
Always comply with the safety distances to
combustible and fl ammable materials!
NOTE!
The revolving function does not work
for stoves with rear-mounted fl ue pipes
If a fl oor plate is required, its size must match the rotating
range of the stove. Never turn stove when lighting fi re!
All manuals and user guides at all-guides.com
max.
fi g. 4
fi g. 5
fi g. 6

6 . Initial Operation

NOTE!
During shipment, condensation moisture can
accumulate in the stove's interior, which may
possibly lead to the appearance of
condensation or water on the stove or fl ue
pipes. Please dry off these damp areas imme
diately.
The surface of your stove was treated in a sandblasting
machine before applying the colour coating. Despite careful
and thorough inspection, there may still be some residual
material in the stove body, which can fall out when your stove
is being installed.
NOTE!
To prevent any damage, please immediately
vacuum up these small steel pellets with a
vacuum cleaner.
The fi rst time a stove is operated, the heat development
causes the emission of volatile components from the coating,
sealing strips and lubricants, and smoke and odours can
occur.
At a higher combustion temperature, this one-time process
can take between 4 to 5 hours.
To achieve this higher combustion temperature, please
increase the fuel quantity recommended
in Section 8, „Adding Fuel/ Heating with Nominal Thermal
Output", by approximately 25%.
3