Quick Projector Setup - Epson BrightLink 455Wi Guide Rapide

Quick Projector Setup

Follow the steps on pages 4 and 5 to get up and running fast. Copy these pages,
laminate if necessary, and keep with the projector as a "cheat sheet." If you need
more detail, turn to the page listed for each step.
1. Install Easy Interactive Driver and TeamBoard Draw (see page 6). Use the
CDs that came with the projector, or download from:
epson.com/support/brightlinkdownloads (U.S.)
epson.ca/support/brightlinkdownloads (Canada)
2. Make sure the batteries are installed in the interactive
pens and remote control (see pages 8 and 9).
Press the button on the pen. If the light turns green,
the batteries are installed and charged.
3. Connect the VGA computer cable and
USB cable to your PC or Macintosh
(see page 10).
4. Turn on the projector by pressing the P power button on the remote control
(see page 12). If you need to adjust the image, see page 13.
5. Display an image from your computer. If the image doesn't appear, see
page 22 or try one of the following:
■
On some PC laptops, you may need to hold down the
keyboard and press
external monitor. It may have an icon such as
CRT/LCD
■
On a MacBook
select
Displays.
■
Try pressing the
4
Introduction
Power
button
or the function key that lets you display on an
F7
.
®
, you may need to open your Display Preferences and
,
Detect Displays
Source Search
®
Show displays in menu bar
button on the remote control.
key on the
Fn
, or it may be labelled
, or
Mirror