Connecting The Cables - Epson BrightLink 455Wi Guide Rapide

2. Install two batteries, inserting the and ends as shown.
+ –
3. Replace the battery cover and press it down until it clicks into place.

Connecting the Cables

VGA computer cable
USB cable
You can connect the projector to any computer that has a standard monitor out
port using the VGA computer cable that came with the projector.
In addition, you must connect the USB cable before you can use the interactive
pens. If the cable is not long enough to reach your computer, you may need to use
a USB booster cable (not included).
You can also project through the USB port (USB display) or through a network.
However, the VGA monitor out port on your computer provides the best
performance when used with the interactive pens.
10
Getting Started