Installation And Connection; Contents Of Package; Technical Data; Installing The Appliance - Thermador T18IF900SP Guide D'utilisation Et D'entretien

en-us Installation and connection
5 Installation and
connection

Contents of package

c o n n e c t i o n I n s t a l l a t i o n a n d
After unpacking all parts, check for any damage
during transport.
If you have any complaints, please contact the
dealer from whom you purchased the appliance or
our customer service.
~ "Customer service" on page 26
The delivery consists of the following parts:
Built-in appliance
■
Interior fittings (depending on model)
■
Installation material
■
Instruction manual
■
Installation instructions
■
Customer service booklet
■
Guarantee enclosure
■
Information on the energy consumption and
■
noises

Technical data

Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
~ "Getting to know your appliance" on page 9

Installing the appliance

Installation location
The weight of the appliance may be up to 460 kg
depending on the model. The base must be
sufficiently stable and should not give. If necessary,
reinforce the bottom.
6
All manuals and user guides at all-guides.com

Check built-in cut-out

The cut-out must fulfill these criteria:
■
■
■
■
■

Side-by-side installation

Observe the specifications in the installation
instructions for a side-by-side installation.
If a partition wall is required between the appliances
it must be at least 5/8" (16 mm) wide.
Anti-tilt bracket must be fitted
Cut-out depth min. 24" (610 mm), for flush
installation 25" (635 mm)
rectangular
stable – the side panels and the top must be min.
5/8" (16 mm) thick and securely attached to the
floor or wall
Depth of shortest side panels min. 4" (100 mm)