Cleaning The Appliance - Bosch VarioComfort I6 Serie Notice D'utilisation

4 Wait until the indicator light (2) stops flashing and
remains lit permanently. Two beeps will be heard.
5 Hold the iron in a horizontal position over an empty
sink to collect the water.
Press the steam release button (15) for 2 seconds. The
descaling process will start automatically. Warning:
boiling water and steam will be released through
the soleplate, carrying limescale and/or deposits
that may be inside. During the process, a beep will
be heard every 5 seconds.
6 After approximately 3 minutes, the iron will stop
releasing steam. A long beep will be heard, indicating
that descaling process has finished. The appliance will
switch off automatically.
7 To clean the soleplate (17), immediately rub off any
residue by running the hot iron over a wet cotton cloth.

2. Cleaning the appliance

Regularly clean your appliance for properly maintenance.
Attention! Burn risk!
1 If the appliance is only slightly soiled, wipe it with a
damp cotton cloth only, and then dry it.
2 If the cloth is synthetic, it may melt due to the high
temperature on the soleplate. Switch the steam off and
rub off any residue immediately with a thickly folded,
damp cotton cloth.
3 To keep the soleplate smooth, you should avoid
contact with hard metal objects. Never use a scouring
pad, or chemicals to clean the soleplate.
* Model dependent
All manuals and user guides at all-guides.com
2x
5"
2"
BO SC H
23