Configuration - DURAVIT sensoWASH D-CODE Notice D'utilisation

7. Operation

7.1 Configuration

Activating / deactivating the mute function
> Press and hold the "Stop" <
panel simultaneously for 3 second to enter one of the special modes. The three
LEDs of the "Water pressure" button and the LED of the "Water temperature / seat
temperature" button flash.
> Press the "Stop" button <
mute mode. An audible signal sounds when the mute mode is deactivated. Two
audible signals sound when the mute mode is activated.
The setting is completed after 10 seconds.
Activating / deactivating the power-saving mode
> Press and hold the "Stop" <
panel simultaneously for 3 second to enter one of the special modes. The three
LEDs of the "Water pressure" button and the LED of the "Water temperature / seat
temperature" button flash.
> Press the "Rearwash" button <
the power-saving mode. An audible signal sounds when the power-saving mode is
deactivated. Two audible signals sound when the power-saving
mode is activated.
The setting is completed after 10 seconds.
40
All manuals and user guides at all-guides.com
> and "Rearwash" <
5
5 > on the control panel to activate / deactivate the
> and "Rearwash" <
5
4 > on the control panel to activate / deactivate
> buttons on the control
4
> buttons on the control
4