All manuals and user guides at all-guides.com
3.3 Connecting to a pressure reducer
Hot water
Cold water
outlet
inlet
Dielectric
connexion
Siphon
3.4 Filling the water heater
Turn on the cold water valve located on the safety unit.
The water heater is lled as soon as you notice a ow of cold
water at the hot water valve outlet.
Close these.
à la sortie des robinets d'eau chaude.
Fermez ces derniers.
Check that the safety unit is operating correctly by moving
Check the sealing at the water inlet and outlets on the
water heater.
Start the operation again until full sealing is achieved.
YES
Pressure
reducer
Water inlet
Inlet mains
cold water
mains
Waste water
drainage (drains)
Safety unit
NO
Hot water
Cold water
Filling:
10 litres
a minute
27