General Information; Scope Of Delivery; Liability, Warranty And Guarantee; Further Applicable Documents - FLUX GS Notice D'instructions

1.

General information

1.1

Scope of delivery

Please check the delivery according to the delivery note.
Also, check the delivery for completeness and integrity.
Do not operate damaged devices.
These operating instructions and corresponding attachments with additional information on
the supplied components are part of the delivery scope.
1.2

Liability, warranty and guarantee

Upon acceptance of the product, the operating company accepts operation responsibility.
The warranty period is 12 months from the date of delivery.
According to our general terms and conditions of sale, this warranty shall only apply if:
- the product has been used for its intended use and in accordance with the present
operating instructions.
-
assembly, commissioning and operation have been carried out in a professional and
appropriate manner.
-
repair has only been performed by authorised and qualified persons.
- only genuine spare parts have been used.
The safety instructions highlighted in these operating instructions and in the corresponding
attachments must always be observed. We will not accept liability for any damages or
failures due to non-compliance with these operating instructions.
This manufacturer warranty is void for any damages and failures resulting from
unauthorised alterations or modifications of the product.
1.3

Further applicable documents

In addition to these operating instructions, you are provided with the following documents:
-
Attachments with additional information in accordance with the components supplied.
-
EU Declaration of conformity
- Resistance chart (on request)
- Spare parts list (on request)
1.4

Storing operating instructions

These operating instructions with the related attachments must be available to the operator
at all times.
1.5

Markers

These markers will help you to understand the operating instructions.
For your orientation, the following formatting is used:
Listings of a descriptive nature are marked with the symbol "•" at the beginning of the
-
line.
- Instructions are marked with the symbol ">" at the beginning of the line.
1.6

Safety instructions

The safety instructions are summarised in section 2. The safety instructions important for
the respective chapter are listed in the individual chapters and the attachments.
> Take a few moments to learn about the meaning of the safety signs used (section 2.2
and 2.3).
Original operation instructions planetary gear 13/36