Ksenia ergo KSI2100000.300 Guide De Programmation page 22

Actually, "Scroll" is not a key but the zone borded by a circle (on the right side of ergo)
typified by a little depression. The action on this zone clockwise (to move forward) or
anticlockwise (to move backwards) permits to:
• Slide forwards or backwards the menu entries;
• Pick the configuration data to enter (which will only be the suitable ones for the
changing data) such as: character, numbers, presetted values, etc. (#);
This area also allows to use the following functions:
"Up arrow". If a prolonged pressure (about 0,5 sec.) is exerted on the 4.4 area of
•
the figure 5; the same functions described for the clockwise moved scroll are
activated (obviously the slide of the menu or the configuration data available
during this procedure is slower since it works at 0,5 seconds steps);
"Down arrow". If a prolonged pressure (about 0,5 sec.) is exerted on the 4.2 area of
•
the figure 5; the same functions described for the anticlockwise moved scroll are
activated (obviously the slide of the menu or the configuration data available
during this procedure is slower since it works at 0,5 seconds steps);
"Left arrow". A prolonged pressure (about 0,5 sec.) exerted on the 4.1 area of the
•
figure 5 allows to slide backwards along a line; if settled on the last character /
number to the right, this function allows to cancel in order one or more data
characters / numbers until they are completely deleted;
"Right arrow". A prolonged pressure (about 0,5 sec.) exerted on the 4.3 area of the
•
figure 5 allows to slide backwards along a line; if it is longer than the 16 characters
the ergo display can show. The forward slide can work in different ways depending
on the data we are working on: if we are browsing a menu it will slide 16 characters
at any one time, while during data editing it will only slide chracter at any one time.
22
All manuals and user guides at all-guides.com
SCROLL
ergo