Ksenia ergo KSI2100000.300 Guide De Programmation page 21

The Enter key allows to enter the intended menu when browsing, to start editing during
configuration phase or to confirm the input of a data during an editing session.
In this regard, the following conduct:
• When broswsing the main menu, a pressure on the Enter key allows to enter the
submenu and to keep exploring in case the menu has several branches
• When visualizing the configuration data, a push on the Enter key permits the editing
of the data itself and this involves:
- the configured object flashes if it is slectable with a predefined set through the Scroll;
- the first character of a string flashes in case the string its being edited;
- the first number flashes when a numeric data or a phone number is being edited.
• During the editing phase, a further pressure on the ENTER key confirms the immission
or modification of the data (which will be sent to gemino or lares that will store it) and
the ergo display permits to show: the following data, the subsequent menu or the
data itself.
If "Enter" key is pushed when ergoTM is in standby mode, the display will show the
installator's data (Name, Number or email address) if they were set during the keypad
configuration. In case the installator's data were not available, the screen will display
the two following default line:
<Installator>
<Information>
The Display shows all the information and the datas ergo can manage. It consist of 2
lines with 16 characters each (it is not graphic), but it can display longer strings (up
to 32 characters) thanks to the manual and automatic shift functions available on
his FW. As a matter of fact, if there's the need to display a 32 characters string on the
first dsplay line it will be shifted to and fro 16 characters at any 3 seconds. If the 32
character string were on the second line it would be shifted through the "Right arrow"
and "Left arrow" keys. It will shift one character at any one time when in a data editing
phase or 16 characters at any one time when browsing the menu.
The keypad is provided with an internal antenna that allows to detect Tags, Mobile
phones or any other devices provided with chips that work with RFID/NFC 13,56MHz
standard simply by approaching it to the area shown in figure at page 15.
All manuals and user guides at all-guides.com
DISPLAY
RFID/NFC AREA
ENTER
ergo
21